Homeowners often take their water heater for granted until it fails. With a working unit, showers become unheated, and washing dishes becomes possible.
Hot Water Heater Replacement Denver inspects the unit to see if your hot water smells like garlic or looks discolored. This can be a sign that the thermocouple or gas control valve needs to be replaced.
When your hot water heater starts to show signs of wear and tear, it can be a sign that it’s time to replace it. You might notice that your showers aren’t as hot, the periods of hot water don’t last as long, or you’re starting to run out of hot water altogether.
Another reason you might want to consider replacing your hot water heater is if it’s making loud or strange noises while running. As hot water heaters age, they can start to make rumbling or knocking noises as sediment builds up in the tank. In this case, it’s best to replace the unit as soon as possible so that it doesn’t cause further damage to your home.
It’s also important to pay attention to your water heater’s energy costs as well. Older units tend to use more energy than newer ones, which can add up on your monthly utility bill. If you’re noticing a sudden increase in your energy bills, it could be a sign that the existing hot water heater is nearing the end of its lifespan and is starting to fail.
If you’re experiencing a lack of hot water, there are a few things you can do to troubleshoot the problem. First, check the thermostat to make sure it’s not set too high – this can lead to scalding water. If you’ve already readjusted the temperature, you may have a faulty thermocouple (in gas water heaters) or a broken element (in electric water heaters).
A dip tube is another part that can break down over time, which can cause cold water to be mixed in with your heated water. The dip tube is designed to pull cool water from the top of the water heater down to the bottom so it can be reheated, but over time this tube can break down or spring a leak.
If you’re still not getting enough hot water, it could be a sign that the unit is simply too small for your family’s needs. It’s a good idea to consult with a professional to discuss your options for replacing the unit.
When you notice rust-colored water coming from your hot and cold taps, the first thing you need to do is determine whether the problem comes from your water heater or from your plumbing pipes. Oftentimes, discolored water is the result of problems with your municipal water supply, such as a break in your water main or seasonal hydrant flushing by the city. This type of problem can be addressed by turning off your hot and cold taps, running the water for a few minutes to clear it, then turning them back on. If the discolored water persists, then it’s time to call a professional.
If the rust-colored water is coming from your water heater, then it’s a sure sign that the tank needs to be replaced. Rust can occur on the surface of the tank due to oxidation, but it can also cause the internal components of your water heater to corrode and leak. A leaking hot water heater tank is not only unsightly, but it can lead to flooding and property damage as well.
Your home’s water heater is a metal box that holds the heated water for your household. Rust can occur in a few different ways on your water heater, including a faulty anode rod or a broken temperature-pressure relief valve. A faulty anode rod can create corrosion on the inside of your water heater, causing rusty water to appear at your hot and cold taps. A faulty temperature-pressure relief valve can allow air to enter the water heater tank, which can cause rust as well.
Water heaters typically have a lifespan of 10-15 years, so if yours is nearing the end of its life, it’s a good idea to have it replaced as soon as possible. Not only will this ensure that your family always has enough hot water, but it will help you avoid the hassle and expense of a potential failure. If you’re ready to replace your old water heater, contact a professional plumber from to discuss your options. We offer fast, affordable water heater replacement to get your family back to enjoying clean, rust-free hot water in no time.
Leaks are perhaps the most serious issue homeowners face with water heater replacement. Water leaks can cause extreme damage to your home and property. It’s important to take quick action to minimize the amount of water that leaks from your hot water heater.
If you see puddles of water around your hot water heater, it’s a good idea to turn off the power to the unit. This will help prevent the water from continuing to heat up. Then, attach a hose to the drain valve located at the bottom of your water heater and connect it to a sink or outside drain gutter. This will allow the water to drain from the tank.
You can also check the pressure relief valve and the temperature and pressure relief (T&P) valve to see if they are loose. If they are, tighten them with a wrench. You can also try replacing the valve if it’s faulty.
A leaking anode rod is another common problem. The anode rod acts as a sacrificial component, absorbing corrosive materials so that the rest of your water heater stays intact. Once the anode rod is completely worn out, it starts to rust and will eventually leak. A plumber can replace it for a relatively inexpensive cost.
Some leaks from your water heater may be more difficult to pinpoint. If you notice that your water has an unusual odor or it’s discolored, this could be an indication of a serious issue. It’s always a good idea to have a professional inspect your water heater if you suspect a leak.
Leaks from your water heater can occur anywhere on the inside or outside of the unit. The location of the leak will indicate what the problem is and how serious it is. For example, a leak from the top of your water heater is usually due to a crack in the tank. This is not a repair that can be handled by the homeowner.
Homeowners can often prevent water leaks by tightening loose components on their hot water heater. This includes the drain and pressure valves, anode rod, and other connections. It’s also a good idea to regularly inspect your water heater for signs of corrosion or other problems. The sooner you address issues with your water heater, the less likely they are to cause serious damage to your home.
If you notice a sudden jump in your energy bills, your water heater may be the culprit. Hot water usage is one of the top consumers of energy in your home, especially in the fall and winter when heating costs are high. The good news is that a new, ENERGY STAR certified electric water heater will save you money on your energy bills. You may also qualify for rebates and tax credits that are available in your area.
Old gas water heaters can also experience increased utility costs as they approach their expected lifespan. Lime and mineral build-up will reduce their efficiency, leading to higher fuel bills. Old gas heaters will also need to be drained on a regular basis. Leaks in the gas connections and pipes can also increase costs. A trained plumber can help you decide whether it is more cost-effective to replace the heater or to repair the leaks.
The first step in reducing your energy costs is to lower the thermostat setting on your water heater. Many people have theirs set too high, resulting in hot water that is much more expensive than necessary. A simple adjustment to 115 degrees F will significantly decrease your energy consumption and prevent scalding injuries.
Other ways to reduce your energy costs include adding a timer control, which will shut your water heater off during your cooperative’s peak demand periods. This small investment will quickly pay for itself in reduced energy bills. You can also insulate the hot water pipes, which will greatly decrease heat loss between the tank and faucets.
If your water heater is approaching its expected lifespan, you should consider replacing it. An ENERGY STAR certified electric model will cost more upfront, but the savings on your energy bills should more than offset this initial investment. A trained professional can help you determine which size of water heater will best meet your household’s needs and advise you on the appropriate wattage.